How To make Explosion Box

Image result for explosion box

Explosion Box Present


Steps In Making :




Step 1 : Gather First The Materials

In making an explosion box the first thing you need to consider is the materials without them we cannot make it right? here are the ff. Materials needed :

1. Scissors
2. Glue/Paste
3 Coloring Materials
4. Any Art Materials





Step 2 : The Base and The Lid

To have a perfect explosion box to make you also need to consider the measurement of the cardboard you'r going to use. Here are the ff measurement:

Making the Base :

Remember -You can use any other color or design for the base you were going to use the decision for that is only you






1. Mark at 15 to 30 cm on each side.





2. Unite the point.






3. Make the Curve of the Heart




4. Fold or lined the intersection/center
of the curved heart you make.



5. This would be the final measure of your base




6. And Now that you finished the base you can now fold the sides to create a box


7. Fold the hearts inside to hide the heart and appeared when you open the box. Repeat the process until you created the box.

Summary:

The Base

  1. Mark at 15 and 30 cm on each side,
  2. Unite the points.
  3. Make a heart shape on each corner.
  4. Score every heart in the middle.
  5. Cut the unwanted part around the hearts.
  6. Fold the sides.
  7. Fold the hearts in the middle.


 Making the LID :
Remember : In making the lid you should consider the correct measurement of the lid it affect the base appearance it may not be fit or it might be too wide. Design are also your choice.



1. Score at 4 cm on each side






2. After you mark the side of the lid fold it.




3. Cut one line in each corner.


4. Put adhesive on the corner. Note that you can use glue, paste and stapler also.


5. Stick the sides together to form another box that you used for the cap of the base you've made.



6. It's time for you to decorate it.



Summary:

The Lid
  1. Score on each side at 4 cm.
  2. Fold the sides.
  3. Cut one line in each corner.
  4. Put adhesive on the corners.
  5. Stick the sides together.
  6. Add some decoration on it.

Credits : instructables.com










































Comments

  1. UnknownMarch 27, 2018 at 3:01 AM

    Thank you for this info, Arianne! I know you can really do this better and wonderful. I don't really think I can do this but based on how you explain on how making the explosion, I think it would really help me! Any tips on thinking about the design we are going to use, colors and such?

    ReplyDelete
    Replies
    1. UnknownMarch 28, 2018 at 2:54 AM

      Patient!! and watch more tutorial about that and you can master it because no one's perfect right

      Delete
  2. UnknownMarch 27, 2018 at 3:21 AM

    Thank you for this info it was helpful where did you to learn that?

    ReplyDelete
    Replies
    1. UnknownMarch 28, 2018 at 2:55 AM

      by watching lots of tutorial you can master it too

      Delete
  3. UnknownMarch 27, 2018 at 3:27 AM

    This tutorial was very helpful . Thank you for sharing your creative ideas and info but do you have any idea how to make it simple and make it neat?

    ReplyDelete
    Replies
    1. UnknownMarch 28, 2018 at 2:56 AM

      do not add lots of design that the boxcannot carry because it ruin everything because too much is bad thank you!

      Delete
  4. UnknownMarch 27, 2018 at 4:39 AM

    THANK YOU FOR THIS INFO. I HAVE NOW IDEA HOW TO SURPRISE MY GIRLFRIEND. DID YOU TRIED THIS ALREADY?

    ReplyDelete
    Replies
    1. UnknownMarch 28, 2018 at 2:57 AM

      Many times and everyone who sees it they've amazed try it too for sure your gf will become happy thank you

      Delete
  5. UnknownMarch 27, 2018 at 8:40 PM

    Pwede ba folder lang gamitin ko pang gawa ng base?

    ReplyDelete
    Replies
    1. UnknownMarch 28, 2018 at 2:58 AM

      Yes so that the box can carry lots of design thnk u

      Delete
  6. UnknownMarch 27, 2018 at 8:40 PM

    Pwede ba folder lang gamitin ko pang gawa ng base?

    ReplyDelete
  7. Supp JaraMarch 27, 2018 at 9:15 PM

    What can I use to create a great pattern outside and inside of my explosion box?

    ReplyDelete
    Replies
    1. UnknownMarch 28, 2018 at 2:59 AM

      you should consider the combination of the pattern you'r gonna choose in the base and in the lid so that your box looks amazing first time when you see it. thnk u

      Delete
  8. UnknownMarch 27, 2018 at 9:22 PM

    can I use the cardboard to do this?

    ReplyDelete
  9. ShadyMacanasElgarioPaloyoMarch 27, 2018 at 9:29 PM

    can i save it here since buying a gift?

    ReplyDelete
    Replies
    1. UnknownMarch 28, 2018 at 3:01 AM

      yes its more affordable and worth it when you give it to someone they're gonna appreciate your effort in making that. TY

      Delete
  10. mhaymaiiMarch 27, 2018 at 10:06 PM

    Thank you for the information but do you have any idea how to make it more easier and simple?

    ReplyDelete
    Replies
    1. UnknownMarch 28, 2018 at 3:02 AM

      use light material and affordable material, TY

      Delete
  11. joshua jamesMarch 27, 2018 at 10:23 PM

    thanks for the information i think it will help me to assemble my computer
    even if nothing. haahhaha :D

    ReplyDelete
    Replies
    1. UnknownMarch 28, 2018 at 3:02 AM

      Sorry but this is not tutorial for Assembly

      Delete
  12. UnknownMarch 27, 2018 at 10:34 PM

    As a member of the Comment Reading Association of Philippines (CRAP) , I'm only here to read comments. Please keep the comments short and simple. We do appreciate your typing efforts. Also please watch your spelling. Thank you.

    ReplyDelete
    Replies
    1. UnknownMarch 28, 2018 at 3:03 AM

      Sorry for that because no one's perfect sorry mr. perfectionist for being unperfect

      Delete
  13. UnknownMarch 27, 2018 at 11:07 PM

    This tutorial will be a great help. thanks, but how long it will be when creating this?

    ReplyDelete
    Replies
    1. UnknownMarch 28, 2018 at 3:04 AM

      It depends how you master it but in beginner in will take time 1-2 hrs I think. TY

      Delete
  14. UnknownMarch 28, 2018 at 4:02 AM

    I learned lot from your blog.
    Do you think there are beautiful than the other visual surprice??

    ReplyDelete
    Replies
    1. UnknownMarch 31, 2018 at 1:08 AM

      i actually didn't understand what you are pertaining but i think that you are trying to say is there any way how to make the explosion more exciting in terms of visual yes i if you improved your creative ways and imagination you can make your box more beautiful

      Delete
  15. UnknownMarch 28, 2018 at 5:55 AM

    Your blog is very informative thank you for that where did you get info about that?

    ReplyDelete
  16. UnknownMarch 28, 2018 at 6:17 AM

    I like how you perform your blog how did you do that?

    ReplyDelete
    Replies
    1. UnknownMarch 31, 2018 at 1:09 AM

      blogger.com you can make beautiful blog if you use that site

      Delete
  17. UnknownMarch 28, 2018 at 7:33 PM

    Thank you for this info. Did you try this and give it to your special someone?

    ReplyDelete
    Replies
    1. UnknownMarch 31, 2018 at 1:09 AM

      Not yet but i'll try to give it as a project in class

      Delete
  18. IanMarch 29, 2018 at 1:53 PM

    How much it will cost if I buy all the materials?

    ReplyDelete
    Replies
    1. UnknownMarch 31, 2018 at 1:10 AM

      cheap materials is ok to make the box more creative it cost i think 30-50 pesos

      Delete
  19. UnknownMarch 29, 2018 at 7:14 PM

    This comment has been removed by the author.

    ReplyDelete
  20. UnknownMarch 29, 2018 at 7:15 PM

    Thank you Arianne . Did you learn it in your own ?

    ReplyDelete
    Replies
    1. UnknownMarch 31, 2018 at 1:10 AM

      not really i just learned it too by reading and watching tutorial

      Delete
  21. UnknownMarch 30, 2018 at 5:16 PM

    Thank you for this info it was really helpful. Would you think if I give this to my bf he'll be happy?

    ReplyDelete
    Replies
    1. UnknownMarch 31, 2018 at 1:11 AM

      surely, because you your effort in making that i think he'll appreciate it

      Delete
  22. UnknownMarch 31, 2018 at 2:37 AM

    Ur blog is informative thank you for sharing ur knowledge about how to make a explosion box. My question is what are the techniques to consider in make a explosion box?

    ReplyDelete
    Replies
    1. UnknownApril 1, 2018 at 3:53 PM

      Materials and being patient to complete a task.

      Delete
  23. UnknownMarch 31, 2018 at 3:02 AM

    Thanks for the info. Can u teach me how to do it?

    ReplyDelete
    Replies
    1. UnknownApril 1, 2018 at 3:55 PM

      Actually by watching tutorial and reading this blog you can make your own explosion box too

      Delete
  24. joey pogiMarch 31, 2018 at 6:54 PM

    Thank you for this info. Where did you learn it?

    ReplyDelete
  25. UnknownMarch 31, 2018 at 8:51 PM

    Your blog is nice.where did you get the source about that?

    ReplyDelete
  26. UnknownApril 1, 2018 at 3:47 AM

    You have some good info. Did you researched about this?

    ReplyDelete
  27. UnknownApril 2, 2018 at 6:42 AM

    thank you for this info. what are the benefits of this box?

    ReplyDelete
    Replies
    1. UnknownApril 4, 2018 at 3:30 AM

      This comment has been removed by the author.

      Delete
    2. UnknownApril 4, 2018 at 3:32 AM

      To give happiness to someone who receives this

      Delete
  28. aj arguellesApril 4, 2018 at 12:33 AM

    thnk you for this info..but do you try this before?

    ReplyDelete
  29. AnonymousApril 4, 2018 at 4:43 AM

    Wow, this is very GOOD Blog! Why you come up with this topic?

    ReplyDelete
  30. UnknownApril 4, 2018 at 6:59 AM

    great info. but do you always make explosion boxes for special people you're close to?

    ReplyDelete
    Replies
    1. UnknownApril 4, 2018 at 3:27 PM

      Not really i just make it when there is special project in our class

      Delete

Post a Comment

Popular posts from this blog

How To Assemble and Disassemble Computer System Unit

Image
In this Tutorial you can easily mastered assembling and disassembling Computer System Unit. Here are some benefits why you need to learn how to assemble and disassemble a System Unit: 1. To troubleshoot your own System Unit and Ease in Maintenance 2. Affordable and lower expenses in fixing computer in a shop. 3. Personal selection and  absolute control over what's in the system. Disassembling the computer system Detach  the power cable: The disassembling of the computer system starts with externally connected device detachment. Make sure the computer system is turned off, if not then successfully shut down the system and then start detaching the external devices from the computer system. It includes removing the power cable from electricity switchboard, then remove the cable from SMPS (switch mode power supply) from the back of the CPU Cabinet. Do not start the disassembling without detaching the power cable from the comp...
Read more

How To Install Window 7

Image
Part 1 Installing Using a Windows installation DVD:  Upgrade Clean Install A clean install is intended for users who want to freshly install Windows on their computer (by deleting all of the data on the hard disk and then installing Windows) or computers that do not have an operating system yet. 1 Enter your computer's BIOS.  Turn off the computer that you want to install Windows on then turn it back on. When the BIOS screen appears or you are prompted to do so, press  Del ,  Esc ,  F2 ,  F10 , or  F9  (depending on your computer’s motherboard) to enter the system BIOS. The key to enter the BIOS is usually shown on the screen. 2 Find your BIOS's boot options menu.  The boot options menu of your BIOS may vary in location or name from the illustration, but you may eventually find it if you search around. If you can't find the boot options menu, search the name of your BIOS (most likely located in the BIOS menu) onl...
Read more