How to Assemble and Disassemble Computer System Unit

Explosion Box Present Steps In Making : Step 1 : Gather First The Materials In making an explosion box the first thing you need to consider is the materials without them we cannot make it right? here are the ff. Materials needed : 1. Scissors 2. Glue/Paste 3 Coloring Materials 4. Any Art Materials Step 2 : The Base and The Lid To have a perfect explosion box to make you also need to consider the measurement of the cardboard you'r going to use. Here are the ff measurement: Making the Base : Remember - You can u se any other color or design for the base you were going to use the decision for that is only you 1. Mark at 15 to 30 cm on each side. 2. Unite the point. 3. Make the Curve of the Heart 4. Fold or lined the intersection/center of the curved heart you make. 5. This would be the final measure of your base 6. And Now that you finished th...

Part 1 Installing Using a Windows installation DVD:  Upgrade Clean Install A clean install is intended for users who want to freshly install Windows on their computer (by deleting all of the data on the hard disk and then installing Windows) or computers that do not have an operating system yet. 1 Enter your computer's BIOS.  Turn off the computer that you want to install Windows on then turn it back on. When the BIOS screen appears or you are prompted to do so, press  Del ,  Esc ,  F2 ,  F10 , or  F9  (depending on your computer’s motherboard) to enter the system BIOS. The key to enter the BIOS is usually shown on the screen. 2 Find your BIOS's boot options menu.  The boot options menu of your BIOS may vary in location or name from the illustration, but you may eventually find it if you search around. If you can't find the boot options menu, search the name of your BIOS (most likely located in the BIOS menu) onl...